PumpWorks 610

PumpWorks 610 manufactures centrifugal API 610 / ISO 13709 pumps for petroleum refinery, gas processing, oil processing, petrochemical, hydrocarbon and crude oil pipeline, offshore installations (platform) and aviation jet fueling. You’ll find our knowledgeable staff makes the development of your API 610 pump an enjoyable process and ensures your finished product meets or exceeds your exact specifications.

API 610 Horizontal Process Pump - Model PWH

• API 610 11th edition type OH2 single stage horizontal end suction, top discharge overhung process pump
• API 610 material classes S-6, S-8, C-6 and A-8 (Other material combinations are available)

PWH API 610 pump features are designed to increase efficiency and the life of the pump. Optional features can be added to improve the design for higher temperature applications. The horizontal pump’s bearing housing configuration allows for maximum parts interchangeability, improved heat dissipation, and prevent oil contamination. PWH also features the exclusive “Smart Lube System” for zero downtime oil mist conversion.

PWH pumps are built, assembled and performance tested in full compliance with API 610/ISO 13709.

API 610 PW-11 Upgrade Program - For horizontal single stage OH2 process pumps

PumpWorks 610 offers PW-11, a retrofit upgrade that meets API 610 11th edition for horizontal single stage OH2 process pumps. The upgrade ensures petroleum refineries have a fast and cost-effective way to modify any brand of existing OH2 pump and achieve API 610 11th edition requirements/reliability without expensive changes to the wet end (casing & impeller) and piping. We utilize customers existing casing and impeller with PumpWorks 610 PW-11 retrofit upgrade kit.

Alternatively, with access to over 1,200 single stage surplus/used OH2 overhung process pumps, we can match your existing unit. PumpWorks 610 upgrades the surplus/used pump out of inventory to drop in place, providing a quick and cost-effective upgraded replacement for your process pump.

API 610 Vertical Process Pump - Model PWI-BB OH3

API 610 PW-11 Upgrade Program - For horizontal single stage OH3 process pumps

The PWI-BB is an API 610, OH3 heavy duty bearing bracketed vertical in-line pump designed to cover a wide range of applications found in petroleum processing facilities, gas processing, petrochemical, offshore installations (platforms), hydrocarbon and crude oil terminal and aviation (jet) fueling applications. All pump thrust is absorbed by the pump bearings in lieu of depending on the motor bearings. The rugged, economical and compact PWI-BB in-line design eliminates the need for an expensive base-plate and saves valuable floor space.

PWI API 610 Vertical In-Line Single Stage OH4 Pump

API 610 Vertical Process Pump - Model PWI OH4

The PWI API 610 is an API rigid coupled vertical in-line pump designed to cover a wide range of applications found in petroleum processing facilities, gas processing, petrochemical, offshore installations (platforms), hydrocarbon and crude oil pipeline and aviation (jet) fueling applications. The rugged, economical and compact PWI in-line design eliminates the need for an expensive baseplate and saves valuable floor space.

API 610 Vertical Process Pump - Model PWV

• API 610 11th edition multistage vertical turbine VS6 (can barrel) and VS1 (open sump) pumps
• API 610 material classes S-1, S-4, S-5, S-8 and A-8 (Other material combinations are available)

The API 610 vertical turbine pump features allow for easy maintenance, higher efficiency and a longer life. The renewable bowl and impeller wear rings permit re-establishing initial running clearances and efficiency. The suction barrel is designed to resist rust and corrosion as well as minimize velocity along the can length, resulting in optimum hydraulic inlet conditions at the suction bowl entrance. More PumpWorks 610 vertical turbine pump benefits in product brochure. Download the pumps are built, assembled and performance tested in full compliance with API 610/ISO 13709 in Tyler, Texas.

API 610 Type BB3 Multistage Pump - Model PWM

Model PWM is the PumpWorks 610 API 610 11th edition type BB3 multistage horizontal split case side suction, side discharge process pump in API material classes S-1, S-6, S-8 and A-8. Other material combinations are available.

The pumps are build, assembled and performance tested in full compliance with API 610 / ISO 13709.

API 610 PWD Horizontal Single Stage BB1 Pump

The PWD is an ISO 13709 / API 610 complaint Type BB1 axially split, single stage, double suction, horizontal, between bearing pump. The application for the pump focuses on medium to high flow crude oil and petroleum products pipelines and ship loading / unloading applications. Also used in a variety of other oil and gas upstream, refinery and power generation applications. The PWD robust casing and custom hydraulics are specifically designed to meet projects with aggressive parameters.

API 610 Pump Packages & Packaged 610 Pump Systems

Pumpworks has the highly experienced and skilled internal professionals needed to design, engineer and assemble straightforward API 610 centrifugal pump packages and more complex packaged pump systems of any type.

Pumpworks610 has the ability to package everything from a small 4kW (5hp) single-stage unit to a very large 2250 kW (4000hp) high-speed multi-stage unit.

Pump Packages are comprised of a typical pump and motor with minimal controls, simply mounted on either a cast iron, channel steel or fabricated baseplate.

Packaged Pump Systems are can include any or the following components or more in any combination:

• Pumps/motors
• Piping Headers
• Valves
• Complex Pumping Controls
• Pressure gauges
• Flow/Pressure Meters
• Tanks
• All Wiring
• Testing Services

Also, systems are typically mounted on specially fabricated baseplates or skids as per customer specifications.
Pump Packages are cost effective due to the benefits associated with space efficiencies, ease of installation, single source responsibility and streamlining of the manufacturing process.

Packaged Pump Systems provide ease of maintenance. Whether of a complex design or to accommodate limited footprint considerations, we build pump packages that allow for easy access to all mechanical and electrical components for maintenance.

For more information, please visit the PumpWorks 610 website.